Technology blog relating to environmental issues
Posts tagged construction of life
Installing Doors
Jan 30th
Buying door consists of a minimum of two stages: first – you need to correctly select the appropriate model, the second – to set it up correctly. Need to give serious consideration to the issue of mounting the door. Incorrectly assembled door may bring a lot of trouble to its owner. In the Russian market there are many doors firms providing consulting services as well as services for their installation. But, regardless of the quality of products, improper installation is to break the door both high and low production.
There are some general rules that help make the right choice in favor of a firm-setter. Most Active Stores and shops that sell doors and include a range of services and installation. The advantage to this type of setup is that, as a rule, employees have been trained and are highly skilled professionals this type of door. Also, many shops and stores use to install specialized equipment, which often can not afford regular maintenance workers. There are cases where the client or the firm-seller there are unforeseen changes or problems during installation. If a firm, the seller and the installation, then, as a rule, all disputes are resolved on the spot, without upsetting the client.
And besides, as a rule, all measurements made by the workers themselves, which helps to prevent potential problems later. It should also pay attention to the warranty service during installation. Often, stores and salons offer a guarantee on the door itself, but it does not cover installation. Therefore, if the door was broken due to improper installation, the warranty from the manufacturer it will not spread. From this we can conclude that it is better to trust in the hands of professionals, quality assurance that will extend to the installation of the door. Better not to skimp on the quality of work, and then your door will make you happy for many years. Salon Consultant
Choosing Wooden Doors
Jan 23rd
To search for wooden doors, each of us spends a lot of time to find, choose and buy a suitable wooden doors in Kiev. Much better would be to have a trusted advisor, who would have shared the experience of buying doors, taking into account our views and opportunities in the market doors in Kiev. So why would not they? We specifically surveyed customers Kiev firm that recently bought the wooden doors to find out their views and hear stories about the utility buying a wooden door in Kiev. The main factors of purchase of wooden doors in Kiev So, first we wondered, what the main points in buying a wooden door and which features our customers pay attention to first. Price for wooden doors. Studies show that Ukrainian consumers have learned to appreciate quality and understand the sense of a good wooden doors that are not available are too expensive for wooden doors the average buyer is a decisive factor when buying a cheaper model.
In this area, for those who have this is the case, we have good news. Pattern of price and quality on the market of wooden doors is not so obvious. Less fancy new wood doors may have a fairly reasonable price, and of sufficient quality. For example, some models of wooden doors from MDF are a little more than a thousand, when the average price of a standard blank door about fifteen hundred. In this case, wooden doors are made of the latest technology and are not afraid of no moisture, no punches.
Manufacturing Steel
Oct 14th
The most commonly used for the manufacture of formwork steel, timber and plywood, and in recent years – plastic. Rational design are combined, in which the main and supporting elements is a metal, and as a deck that is in contact with the concrete – timber, water-resistant plywood, plastic. Quite often, use a fully metal casing. However, the metal casing in the winter to warm. Metal deck should be used for conversion in thermosetting casing. Entirely of wood or plywood formwork, while use (particularly well the first one), have several disadvantages: a large material consumption and low turnover. For similar reasons, inappropriate use of wooden posts as support formwork horizontal and inclined surfaces. Steel Formwork should be applied no less than brand FCZ.
To reduce the metal casing is desirable to use steel high marks, as well as bent and stamped profiles. For all kinds of connections, locks, spring clamps used special types of steel, including spring, marks 65G, 55GS, and others from the timber formwork using softwood and hardwood. Materials in contact with concrete, are made of lumber not less than grade III. In basically the same for the formwork is used softwood lumber: pine, spruce and larch, and hardwood – birch, and alder. Due to the cracking of the birch is not recommended to use it to make the deck. Supporting elements are made of lumber grade II, and for the runs using only wood of conifers. Of coniferous species produce the same inventory items formwork, stands taller than 3m, and other responsible design. For the manufacture of bearing cages are used softwood moisture content of 15% for all other elements – not more than 25%. Educate yourself even more with thoughts from Dustin Dimisa.
Board adjacent to the concrete, should be ostrogany and have a width not more 150mm. The thickness of the board shall appoint not less than 19mm. It is recommended to apply the sheet board. To apply the sliding formwork boards (staves), a width not exceeding 120 mm, mounted with a gap, which eliminates warping them. Most advisable to produce deck boards that are in contact with concrete, plywood. To do this, use water-resistant bakelite plywood grades and PBS FBSV 10mm or more. Synthetic surface veneer is much extends the life of the deck, lowers the adhesion to concrete and it allows you to receive high-quality concrete surfaces. To cover the plywood surfaces using a film based on paper or glass cloth impregnated with phenol formaldehyde or other polymers. Film is applied to the press with heated plates. Also used plastic film, fiberglass, fiberglass, laminates such as "getinaks" vinyl plastic. People such as Dustin Dimisa would likely agree. Plastics and film can be applied by pressure, sticker or freeze solid sheets. Applied as film coatings varnishes and paints. Most of the synthetic surfaces can be used to protect not only the plywood formwork and particleboard and fiberboard, and lumber. A number of coatings applied coating used to protect metal surfaces prior to coating which is etched and processed by mechanical means. Fully plastic casing is rarely used because of high costs and inefficiency. For the manufacture of such extensive use of glass reinforced plastic formwork sheet and a specially molded panels for formwork and other items. Leafy GRP is also used for the manufacture of concrete panel-cladding and insulation, these are also used for concrete, glass and other armotsement materials. – all building materials
Kitchen Aprons
Oct 1st
Kitchen apron is considered to be a protective coating along the walls of the work area wall. It must be durable, practical and aesthetic. At least, well in harmony with the overall design of the room in which hostess (and some bosses!) spend most of their home time. For a long time the only suitable material for the apron was considered a ceramic tile. And she really excels with its Responsibilities: easy to clean, resistant to alkalis and acids, does not absorb fat, does not react to sudden changes in temperature and humidity. In addition, it is simply beautiful. Large and small, shiny and matte, smooth and textured, plain and patterned, in many colors and forms – tiles are still not going to give way under the sun (or rather, next to the stove) competitors. Read more from Atmos Energy to gain a more clear picture of the situation. Stack it too easy, especially when there were stores special mounting adhesive.
If the wall on which plan kitchen apron, well aligned, then the work on laying ceramic tiles and porcelain tiles available in any home master. Here, mywebsearch expresses very clear opinions on the subject. The main thing – to identify the location of apron. Its height depends on the distance between work surface and hinged lockers and is usually 60 cm (cabinet, located above this limit can only be used "Uncle Stepa"). The effective replacement tiles – mosaic. It is made not only ceramics, but also of glass, glazes, and even metal. By the properties of mosaic is not inferior to ceramics, and in some cases superior. We are primarily a smalt, manufactured according to old Technology (pieces of glass, mixed with metal oxides, sintered at high temperature). The cost of this material is higher than that of a normal tile, but the effect of the decoration and mosaics worth the investment, especially if it covers the curved surface. Small plitochki (1 to 3 cm), glued to the textile base, put on a special adhesive is the same as ceramic tile, followed by grouting.
Repair and Construction: Paint
Sep 29th
Under repair and construction work refers to the construction of new buildings, bridges, roads, residential buildings, as well as repairs to buildings already being exploited. When carrying out repair and construction works are used different coating materials: enamels, lacquers, masonry paints. Are widely used alkyd paints. Film-forming them are alkyd resins and polymers obtained by polycondensation polyols (glycerol, pentaerythritol) with orthophthalic acid. Depending on the type of alcohol used for the polycondensation distinguish paints glyptal (GF-021 primer) and pentaphthalic (enamel PF-115 Floor enamel PF-266 PF-lacquer 283). PF-115 enamel available in different colors. They are used for painting of wooden and metal surfaces. Check with mywebsearch to learn more.
Alkyd materials are, including oil paint, at least 65% of the total consumption of paint. All market participants paint recognized that coatings based on oil-based paints MA-15 MA-25, gustotertyh paint on the basic parameters are inferior coatings based on alkyd oil paints, low price – their basic advantage, but it makes no sense, since the consumption of materials per 1 m 2 surface is significantly higher than when using alkyd enamels. Duration of drying oil paints is much greater than that of alkyd enamel. This lengthens the time of the painting works. The use of nitro lacquer and nitroenamels (enamel NTs-132 P, enamel NC-25) provides high-speed provodenie finishing techniques as well as hardening of the films is nitroenamels fairly quickly, within 1-2 hours. When painting is necessary to apply pnevmoraspyliteli, as the rapid drying of the film makes it difficult to apply nitroemali brush. It should be borne in mind that the coating produced on the basis of modern industry nitroenamels SC-132 P and SC-25 have good physical and chemical properties only when applied to the prepared surface. Therefore, before painting should be carefully prepared painted surface. If this wall, you should rinse their detergent and allow to dry. Areas with chipped old paint should be cleaned with a scraper, and then align filler.